Microbe-Lift PL Gel Bacteria 8-oz.
- Product Details
- Shipping
- Video
MICROBE-LIFT PL/GEL 8-OZ
PL/GEL is a technological breakthrough because it's the first product that puts the bacteria right where you want it and it STAYS THERE ! PL/GEL will quickly attach to and populate any filter media including foam, strapping, floss, bio-balls, ceramic media etc. This will help to rapidly establish the necessary biological activity in your filter to stabilize your pond's enviroment quickly. It will also help restore this activity to your filter when you clean or change the media in your filter.
Easily applies to the filter pads/media without running or getting messy
Contains the same spectrum of bacteria found in MICROBE-LIFT/PL
Contains naturally occuring biopolymers, helping organisms quickly attach to the media allowing for an 80% reduction in filter start-up time
Helps to stabilize pond enviroment quickly upon startup and to eliminate transient instability that can occur when filter media is cleaned or replaced
Allows for more frequent cleaning of filters without sunsequent instability if a pond has a high solids loading where frequent cleaning is beneficial
Reduces the frequency of cleaning by accelerating the breakdown of organic solids that can lead to high maintenance requirements
Helps to establish denitrifcation in the filter which can lower nitrate levels in the pond.
Inoculate (spread) PL/GEL directly to filter pad or media. The PL/GEL will absorb into the pad/media by letting it set for 1 to 2 hours before inserting back into filter or skimmer. After insertion, turn off recirculating pump for 1 to 2 hours, providing water can maintain adequate oxygenation without circulation for this amount of time. Repeat application of PL/GEL: each cleaning/replacement of filter pad/media; when nitrate levels exceed 0.6 mg/L; or as necessary to maintain optimum performance from your filter or skimmer.
Use as needed.
PL/GEL is a technological breakthrough because it's the first product that puts the bacteria right where you want it and it STAYS THERE ! PL/GEL will quickly attach to and populate any filter media including foam, strapping, floss, bio-balls, ceramic media etc. This will help to rapidly establish the necessary biological activity in your filter to stabilize your pond's enviroment quickly. It will also help restore this activity to your filter when you clean or change the media in your filter.
Easily applies to the filter pads/media without running or getting messy
Contains the same spectrum of bacteria found in MICROBE-LIFT/PL
Contains naturally occuring biopolymers, helping organisms quickly attach to the media allowing for an 80% reduction in filter start-up time
Helps to stabilize pond enviroment quickly upon startup and to eliminate transient instability that can occur when filter media is cleaned or replaced
Allows for more frequent cleaning of filters without sunsequent instability if a pond has a high solids loading where frequent cleaning is beneficial
Reduces the frequency of cleaning by accelerating the breakdown of organic solids that can lead to high maintenance requirements
Helps to establish denitrifcation in the filter which can lower nitrate levels in the pond.
Inoculate (spread) PL/GEL directly to filter pad or media. The PL/GEL will absorb into the pad/media by letting it set for 1 to 2 hours before inserting back into filter or skimmer. After insertion, turn off recirculating pump for 1 to 2 hours, providing water can maintain adequate oxygenation without circulation for this amount of time. Repeat application of PL/GEL: each cleaning/replacement of filter pad/media; when nitrate levels exceed 0.6 mg/L; or as necessary to maintain optimum performance from your filter or skimmer.
Use as needed.
